LuK SAC mounting tool
LuK SAC mounting tool (400 0237 10)
Content:
- 6 different tapered bushings to spread both white tensioning/centring elements (15-28 mm) to support the clutch disc
- Universal centring pin with guide and tensioning element
- 3 screw-on centring pins of varying diameter (12 mm, 14 mm, and 15 mm) for pilot bearing
- Pressure piece and spindle carrier with 3- and 4-hole pitch
- Centring sleeve (BMW)
- 4 studs M6, M7 and M8
- 4 knurled nuts
- Thread closing cover to protect the inner thread
- 2 tensioning/centring elements (12-28 mm) to fit pilot bearing and crankshaft bore
- 4 special centring pins (BMW) of varying diameter and corresponding screw
- Face spanner/releasing tool for pretensioned clutches (Audi, Seat, Skoda and VW)
Application:
Using a special tool is an absolute must to ensure correct installation of the Self-Adjusting Clutch. No counteracting forces must be applied during installation to prevent early rotation of the adjusting ring in the clutch pressure plate.
Back to Overview
Call us
Schaeffler REPXPERT Service Center
Available Mon – Fri
08:00 - 17:00
00800 1 753 3333*
*free of charge from local landlines
Schaeffler REPXPERT Service Center
Do you have a question or need help?Call us
Schaeffler REPXPERT Service Center
Available Mon – Fri
08:00 - 17:00
00800 1 753 3333*
*free of charge from local landlines